Diesel welders and generators Shindaiwa - MVN machinery MVN-machinery linkedin
  • Welding
  • Generator
  • Reference
    • Advansed diesel welder Shindaiwa
    • Gas and oil sector
    • Shindaiwa in road construction
    • Diesel welders utility sector
    • What is a Simul Phase generator
    • Difficulties in using 3-phase Generator
  • About Us
  • Contacts
  • Send request
Fast communication
Extended information

By choosing "Submit" you agree to the terms of the Privacy Policy

Go to Privacy Policy >>
Schedule a OnLINE Demo
Extended information

By choosing "Submit" you agree to the terms of the Privacy Policy

Go to Privacy Policy >>
  • Home
  • SERVICE AND TECHNICAL

Service and technical support for Diesel Welders and Generators

Articles about diesel welders and generators
Service and Technical Support for Diesel Welders and Generators
Diesel welders and generators Shindaiwa
Service and Technical Support for Diesel Welders and Generators
Article Content
  • On-site technical support
  • What is included in the service
  • Shindaiwa service in detail

Shindaiwa Diesel Welders and Generators are sophisticated, high-tech industrial equipment of high quality that requires proper maintenance during its lifetime. In order to ensure the smooth operation of such welding equipment, a professional approach of the operator in tandem with systematic maintenance is required. The complex of works maintaining the stability of the equipment is described in detail in the operation manual.

MVN-machinery, professionally and systematically performs Service Maintenance of Welding Units and Generators by agreement with the owner. As a certified representative of Shindaiwa, MVN-machinery provides Technical Support to users in case of questions about the setup and operation of the machines and generators.

Replacement of filters in the Diesel Welder Oil change during service Replacement of Spare Parts the Units

Service of Diesel Welders and Generators includes replacement of Filters, Oil, Parts according to regulations

On-site technical support - The organizational side of the issue.

On-site technical support for Diesel Welders

In the unfortunate event of any issues arising with the equipment MVN-machinery has supplied, the company offer a unique advantage. To protect our clients from hassle (for example, equipment delivery to a service center), he MVN-Machinery’s specialized repair team is prepared to make on-site visits directly.

Buring one day in Texas and up to 2 days in other states depending on your location.

This means that if something goes wrong, we'll come to you. MVN-machinery experienced technicians will assess and address the problem in person, swiftly and efficiently resolving any issues to get your equipment back in working order (contact us). This approach not only saves valuable time but also significantly reduces costs associated with downtime and transporting the equipment for repair.

What are Shindaiwa's basic maintenance requirements for welding equipment?

Basic maintenance requirements for welding equipment

Before each start-up of the Diesel Welder or Generator, perform a general inspection of the equipment as a whole and:

  • check the level and addition of fuel, engine oil, water / coolants;
  • make sure that there are no leaks of fuel, oil, water;
  • checking the level and adding electrolyte to the rechargeable battery;
  • draining the liquid from the leakage protection sump.

Shindaiwa service in detail

Welding Unit Air Filter in the process of being replaced Replacement Oil Filter Shindaiwa DGW400 Replacing the fuel filter when servicing a Diesel Welder DGW400

The set of maintenance measures seems to be long, but their observance significantly prolongs the service life of welding equipment and generators. So after 50 hours of operation of the machine (after the first start) and every 100 hours of subsequent operation it is necessary to:

  • change the oil in the engine;
  • clean the fuel strainer;
  • clean the filter element of the air filter;
  • adjust the V-belt tension.

According to the manufacturer's recommendation (Shindaiwa), the oil filter should be changed after 50 hours of operation after the first start-up and every 200 hours after that.

Drain water and clean the fuel tank of the welding machine (e.g. DGW400) every 200 hours. The Shindaiwa welding machine should be serviced at intervals of 400 hours of operation, including:

  • cleaning of the radiator grille;
  • cleaning of the radiator from the inside;
  • checking/adjusting the injection nozzles;
  • inspection and cleaning of the leakage protection tray;
  • replacement of the V-belt;
  • replacement of fuel filter and air filter elements.

Service of Diesel Welders and Generators involves a number of other actions in the long term (after 1000 - 2000 h):

  • adjustment of valve clearances,
  • checking the injection pump,
  • replacement of gaskets in the top and bottom of the fuel tank,
  • replacement of fuel hoses,
  • oil renewal,
  • coolant change,
  • and more.

Timely and quality service prevents emergency interruptions in the operation of the equipment, significantly extends the service life and improves the quality of work.

MVN-machinery - Supply and Service of Diesel welders and Generators in the USA

About Us Service And Technical Support Call Us Contact Us
Сreated at: 30.10.2023 Update at: 22.11.2023
MVN Machinery
Fast communication
Diesel welders and diesel generators Shindaiwa
Privacy Policy ⚠ Warning: Cancer and Reproductive Harm
  • Welding
  • Generator
  • Reference
    • Gas and oil sector
    • Shindaiwa in road construction
    • Diesel welders utility sector
    • What is a Simul Phase generator
    • Difficulties in using 3-phase Generator
  • About Us
  • Contacts
  • Articles
  • Related
  • Send request
© 2025 MVN-machinery. All Rights Reserved.